Publicité
Assemble the CYLINDER (79) to the Cylinder caddy. See detail 13-A.
Place the CYLINDER RETAINER WIRE (77) over the Cylinder Collar. See detail 13-B.
Step
Attaching TYPE 1 fitting to the fuel outlet valve in detail 13-C.
13
Engineering Code
LD113342 * /LD113322 *
LE113342 * /LE113322 *
LE113343*
*Cylinder not included
13-A Set CYLINDER (79) in the cylinder caddy
with the outlet valve facing the front of the
grill.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
CONTROL VALVES MUST BE
OPENING THE GAS CYLINDER VALVE
13-A
Outlet
Valve
79
,
BURNER
"OFF"
BEFORE
.
13-B
13-B Place the CYLINDER RETAINER WIRE (77)
over the Cylinder collar, by rotating the wire
from the original position toward the cylinder
collar.
WARNING:
grill and when attaching or replacing the
L.P. gas cylinder, insure that the gas
supply hose is free of kinks and/or
damage and is at least 3" away from hot
surfaces such as the grill casting.
77
Left end
During assembly of
13-C
Type 1
Nipple
13-C Insert the
into the c
Turn the
tighten. N
wheel wil
connectio
a positive
Publicité
