Publicité
Assemble the CYLINDER (79) to the Cylinder caddy. See detail 9-A.
Place the CYLINDER RETAINER WIRE (77) over the Cylinder Collar. See detail 9-B.
Step
Attaching TYPE 1 fitting to the fuel outlet valve in detail 9-C
9
Outlet
Valve
Engineering Code
LD113342 * /LD113322 *
LE113342 * /LE113322 *
LE113343*
*Cylinder not included
9-A Set CYLINDER (79) in the cylinder caddy with
the outlet valve facing the front of the grill.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
CONTROL VALVES MUST BE
OPENING THE GAS CYLINDER VALVE
9-A
79
9-B Place the CYLINDER RETAINER WIRE (77)
,
BURNER
"OFF"
BEFORE
.
9-B
over the Cylinder collar, by rotating the wire
from the original position toward the cylinder
collar.
WARNING:
grill and when attaching or replacing the
L.P. gas cylinder, insure that the gas
supply hose is free of kinks and/or
damage and is at least 3" away from hot
surfaces such as the grill casting.
77
Left end
During assembly of
TYPE
Nippl
9-C Insert the
into the c
Turn the
tighten.
wheel wil
connectio
a positive
Publicité
