Safety Instructions - Seliger AQUASPOT 300 POWER LED Mode D'emploi

SAFETY INSTRUCTIONS

When using the Aquaspot 300 Power LED be sure to take note of the following safety instructions:
DANGER OF ELECTRIC SHOCK!
Danger of electrocution when the spotlight is connected to 230 V (mains electricity).
• If used afloat, the surface of the spotlight may reach high temperatures. Please make sure to let the spotlight
cool off before handling and keep out of reach of children.
• The Aquaspot 300 Power LED may only be operated using the original transformer.
• Do not use the Aquaspot 300 Power LED if the connecting cable show any signs of damage. Always
perform a visual check of all product components before use. Damaged products must not be used. If one of
the product components is damaged, please have it examined by a qualified electrician.
• The information on the model plate of the transformer must match the mains power supply.
• Never carry the spotlight or the transformer by their cables. Never unplug the nebuliser from the mains
supply by pulling on the cable. Keep the cable protected from heat, oil and sharp edges. Do not expose the
transformer to direct sunlight, rain or mechanical stress. The transformer has been certified for outside use.
NOTE! The mains adapter is only licensed for use above water.
It must not be used under water.
• Disconnect the spotlight from the mains supply when performing maintenance work or if you do not intend to
use the nebuliser for a longer period of time.
• For safety reasons, the spotlights must be powered only by the supplied transformer. Two transformers must
not be connected in parallel.
• The mains supply to the transformer must be fitted with a residual current circuit breaker designed to trip on
a leakage current of 30 mA (DIN VDE 0100-702). Please ask a specialised dealer for more information.
• The total wattage of the connected lights must not exceed the rated power of the transformer.
• For Switzerland: In Switzerland mobile appliances which are used outdoors, must be connected via a
residual current device.
• Use only original seliger
liability for damage caused by incorrect use of this product, or for damage caused by the product to plants or
animals.
spare parts, otherwise correct operation cannot be guaranteed. We accept no
®
ENGLISH 13