Publicité
2 - The product is shipped with the branch tips compressed to the
center. Each branch tip must be shaped to its proper position to give
the product a natural look.
Gently grasp the branch tips and spread them out away from the
center spine.
Adjust branches, and fill in gaps to achieve maximum fullness.
During the shaping, the snow powder and leaves may drop down.
06
3 - Connect the lights to power line (Part I and Part J).
For 3FT tree, there is no need to connect the power line. For 4FT
tree, connect Part I
which with two connections to Part C and Part D. For 5FT tree,
connect Part J which
with three connections to Part C, Part F and Part G.
Each tree section has a light string cord with red ribbon that will be
convenient for you
to find them. Then plug each cord into a receptacle on the power
line. Note that the male
and female connectors will only connect in one direction. After
connection, twist closed
each connector nut securely.
The tree is now ready to be decorated. Ensure that the decorations
are uniformly distributed on the tree. Plug the adapter into the power
supply then the lights will turn on.
Disassembly and storage
Remove all decorations.
Disassemble the tree in reverse order of the assembly.
For a better conservation, store the tree in its carton box in a cool
dry place.
Do not store when humid.
Caution
To be assembled by or under the supervision of an adult.
Keep plastic bags out of reach of young children.
Keep away from fire or hot temperatures. Do not light a candle on or
near the tree.
Do not leave lighted lighting chains unattended.
Do not overload the tree with heavy and/or too numerous
decorations.
Place the tree on a plane surface in order to ensure its stability.
Keep an eye on young children.
Keep those information for future reference.
07
Publicité
