Publicité
H O W TO U S E
CUSTOM PROGRAM
CUSTOM PROGRAM allows you
to store a customized wash cycle
for future use. It allows you to
save favorite temperature, spin
speed, soil level, and other options for a cycle,
and then recall them at the touch of a button.
To store a Custom Program:
1
Select a cycle.
Adjust the Wash/Rinse Temperature, Spin
2
Speed, and Soil Level to the desired settings.
Set any other desired options.
3
Press and hold the CUSTOM PROGRAM
4
button for 3 seconds. You will hear two
beeps to confirm the settings have been
stored.
SPECIAL FUNTIONS & CYCLES
The special function buttons also activate
secondary functions, including CHILD LOCK and
TUB CLEAN. Press and hold the button marked
with the secondary function for 3 seconds to
activate.
CHILD LOCk
Use this option to prevent
unwanted use of the washer or
to keep cycle settings from being
changed while the washer is
operating. Press and hold the PRE WASH button
for 3 seconds to activate or deactivate CHILD
LOCK. CHILD LOCK will be shown in the display,
and all controls are disabled. The washer can be
locked during a cycle.
TUB CLEAN
A buildup of detergent residue
can occur in the wash tub over
time and can lead to a mildewy
or musty smell. The TUB CLEAN
cycle is specially designed to remove this
buildup. The display will show a message to add
liquid bleach to the dispenser. Prewash option
will be selected. After the cycle has ended,
open the door and allow the drum interior to dry
completely. Refer to Care and Cleaning of the
Interiorfor further information.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
All manuals and user guides at all-guides.com
IMPORTANT: If you press and hold the CUSTOM
PROGRAM button for 3 seconds, you will
overwrite any previously stored CUSTOM
PROGRAM.
To recall a Custom Program:
Press and release the CUSTOM PROGRAM
1
button. The stored settings will be displayed.
2
Press and release the START/PAUSE button
to start the cycle. The washer will start
automatically.
COLD CARE™
Use this cycle to wash without hot water and
heating. For high wash efficiency, recommended
less than 8 lbs. and low speed spin for ultimate
fabric care.
BRIGHT WHITE™
Use this cycle to wash white fabrics with bleach.
NOTE : Before use this cycle with bleach, check
bleach symbols on your cloths.
HAND WASH/WOOL
• Only woolen items that are designated as
"Machine-Washable" should be washed in this
washing machine
• Wash only small loads for optimum fabric care
(less than 8 lbs.)
• Only neutral (wool safe) detergents should
be used (Only a small quantity of detergent
is needed due to the small load size and low
volume of water in the cycle.)
• The HANDWASH/WOOL cycle uses a gentle
tumble action and low speed spin for ultimate
fabric care
The wool wash cycle of this machine has been
approved by Woolmark for the washing of machine
washable Woolmark products provided that the
products are washed according to the instructions
®
on the garment label and those issued by the
manufacturer of this washing machine, M0807
Certified by NSF
Certificado por NSF
NSF International (formerly the National Sanitation Foundation),
certifies that SANITARY cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.
Publicité
