MS-7672 Manboard
USB 3.0 Expanson Connector: JUSB4
The USB 3.0 port s backwards compatble wth USB 2.0 devces. It supports data trans-
fer rates up to 5Gbts/s (SuperSpeed).
Important
Note that the VCC and GND pns must be connected correctly to avod possble
•
damage.
To use a USB 3.0 devce, you must connect the devce to a USB 3.0 port through an
•
optonal USB 3.0 complant cable.
IEEE1394 Expanson Connector: J1394_1
Ths connector allows you to connect an IEEE 1394 devce va an optonal IEEE 1394
expanson bracket.
En-22
USB 3.0 Bracket (optonal)
1394 Bracket (optonal)
* The MB layout n ths figure s for reference only.
* The MB layout n ths figure s for reference only.