Télécharger Imprimer la page

Hisense FC-39DD1PAA/UBD Manuel D'utilisation page 27

Publicité

Installation, maintenance, repair, and decommissioning instructions
Presence of fire extinguisher
If any hot work is to be conducted on the refrigerating equipment or any
associated parts, appropriate fire extinguishing equipment shall be available. A
dry chemical or CO
area.
No ignition sources
No person carrying out work in relation to a refrigerating system which involves
exposing any pipe work shall use any sources of ignition that may lead to the risk
of fire or explosion. All possible ignition sources, including cigarette smoking,
should be kept sufficiently far away from the site of installation, repair, removal
and disposal, during which refrigerant might be released into the surrounding
space. Prior to starting work, the area around the equipment shall be surveyed to
make sure that there are no flammable hazards or ignition risks. "No Smoking"
signs shall be displayed.
Ventilated area
Ensure that the area is either open or adequately ventilated before breaking into
the system or conducting any hot work. Adequate ventilation must be maintained
throughout the period that the work is carried out. The ventilation should safely
disperse any released refrigerant and preferably expel it externally into the
atmosphere.
Checks to the refrigerating equipment
When changing electrical components, they shall be fit for the purpose and to the
correct specification at all times. The manufacturer's maintenance and service
guidelines shall be followed. If in doubt, consult the manufacturer's technical
department for
The following checks shall be applied to installations using flammable refrigerants:
The actual refrigerant charge is in accordance with the room size
a)
within which the refrigerant-containing parts are installed;
The ventilation machinery and outlets are operating adequately and are not
b)
obstructed;
c) Markings on the equipment remain visible and legible. Markings
and signs that are illegible shall be corrected.
fire extinguisher should be placed adjacent to the charging
2
assistance.
27

Publicité

loading

Ce manuel est également adapté pour:

Sd/sc-303h/hpSd/sc-303h/hpeuHicfc-303c