Publicité
Installation of your new appliance
Before using the appliance
for the first time, you
should be aware of the
following tips.
Ventilation of appliance
In order to improve efficiency
of the cooling system and
save energy, it is necessary to
maintain good ventilation
around the appliance for the
dissipation of heat. For this
reason, sufficient clear space
should be available around the
appliance.
Suggestion:
It is advisable to leave 75 mm of
space from its back to the wall
and at least 100 mm from its
sides to the wall.
100mm)
100mm
•
This appliance performs
well in the climate class 4
(Please refer to the climate
type marked on the
parameter nameplate on
the back of the product). It
may not work properly if
left at a temperature above
or below the indicated
range for a long period.
Climate
Relative
class
humidity
4
Stand your appliance in a dry place
to avoid high moisture damage.
Keep the appliance out of direct
sunlight, rain, frost or heat sources
such as stoves, fires or heaters.
75 mm
Leveling of appliance
For sufficient leveling and air
•
circulation in the lower rear
section of the appliance, the
bottom feet may need to be
adjusted. Please use a suitable
spanner.
.
Note
Dew
Ambient
point
tempera
temper
ture
ature
55%
20℃ +30℃ 14.8 g/kg
Water
vapour
mass in
dry air
12
Publicité
