Publicité
1. Check that all safety and operation decals are
present and legible. See Safety - Safety Decals.
2. Check that all operator's manuals (product, engine,
generator, etc.) are with the unit.
3. Check the following components for wear and
damage, and for proper operation:
A. Tongue jack
•
Check for rust or damage. Repair or
replace as needed.
•
Check for proper operation. See
Transporting - Using The Tongue Jack.
B. Hitch Assembly (trailer coupler / lunette ring)
•
Check for rust or damage. Repair or
replace as needed.
•
Check for proper operation. See
Transporting - Coupling And
Uncoupling The Trailer Hitch.
•
Check hardware for proper tightness.
Tighten as needed.
C. Safety chains
•
Check for rust or damage. Repair or
replace as needed.
•
Check hardware for proper tightness.
Tighten as needed.
D. Trailer lighting cable
•
Check for cut, frayed or bare wires.
Repair or replace as needed.
•
Check connector for damage. Repair or
replace as needed.
E. Tires
•
Check for wear, cuts, cracks, etc.
Replace as needed.
•
Check and adjust inflation pressure.
See Specifications for proper inflation
pressure.
F. Brakes
•
Check brakes for proper operation and
wear. Repair as needed.
G. Axle and undercarriage
•
Check for rust or damage. Repair as
needed.
H. Electrical wiring
•
Check for cut, worn or bare electrical
wiring. Repair as needed.
WARNING
Electrocution Hazard
Operating the unit with cut, worn or bare electrical
wiring could result in death or serious injury. Repair
or replace damaged wiring before operating the
unit.
8
I.
Engine
•
Check for leaks or other signs of wear or
damage. Repair as needed.
•
Check the air cleaner to be sure it is
firmly attached, and that the air cleaner
seals and hose clamps are properly
secured. Check the air cleaner element.
Replace if necessary.
4. Check and adjust fluid levels.
A. Engine oil
•
Refer to the engine operator's manual
for oil recommendations, capacity, and
procedures.
NOTICE
Operating engine without oil will cause engine
damage.
B. Engine coolant
•
Refer to the engine operator's manual for
coolant recommendations, capacity, and
procedures.
NOTICE
Operating engine without coolant will cause engine
damage.
C. Fuel
•
See Operation - Fueling The Unit for
fuel tank location, capacity, and fueling
procedures.
Transporting
WARNING
Unsafe Operation Hazard
Operating the equipment without proper training could
result in death or serious injury. Never allow anyone to
operate the equipment without proper training.
Before transporting, read Safety.
Preparing For Work Site Delivery
Prepare the unit for delivery to the work site, especially if
it has been stored or idle for a period of time.
WARNING
Unsafe Operation Hazard
Operating or transporting a machine with worn, damaged
or missing parts can result in death or serious injury.
Always replace worn, damaged or missing parts promptly.
Do not operate or transport this machine until all worn,
damaged or missing parts have been replaced, and
proper operation of the machine has been verified.
www.allmand.com
Publicité
