Publicité
f Periodically inspect the area where the mower is
used and remove all stones, sticks, wires and other
foreign objects.
f Do not run any live mains cables in the working
area. If a mains cable becomes entangled in the
robotic mower it must be isolated before any attempt
to remove it .
f Periodically inspect to see that the blades, blade
bolts and cutter assembly are not worn or damaged .
Replace worn or damaged blades and bolts in sets to
preserve balance .
f Never operate the machine with defective guards or
without safety devices.
f Do not put hands or feet near or under rotating parts.
f Never pick up or carry the machine while the motor
is running .
f Do not leave the machine to operate unattended if
you know that there are pets, children or people in
the immediate vicinity .
f Start the machine according to the instructions
standing well away from rotating parts.
f Do not use the product at the same time as a
sprinkler or use the schedule to ensure that the two
systems never run simultaneously .
f If for any reason the product is submerged, take it
away from water and turn it off using the On/Off
switch . Do not attempt to switch the product on but
contact your Authorized Honda Dealer .
f Do not modify this product . Unauthorized
modifications may impair the safety of your product
and may result in increased noise and vibration .
f For machines used in public areas, warning signs
must be placed around the working area of the
machine. The signs must include the following texts:
Warning! Automatic lawnmower! Keep away from
the machine! Supervise children!
Turn off the product using the On/
Off switch:
– before clearing a blockage,
– before checking, cleaning or working on the machine,
– before storage,
– if the machine vibrates abnormally (stop and check
immediately),
– after striking a foreign object, inspect the machine for
damage and get advice on necessary repairs from your
Authorized Honda Dealer .
Maintenance
f Always wear gardening gloves when handling or
working near the sharp blades .
f Before working on the mower, turn it off using
the On/Off switch.
f Before working on the docking station or power
supply, remove plug from mains .
Clean the exterior of the machine thoroughly using a
soft brush and cloth. Do not use water, solvents or
polishes . Remove all grass and debris, especially from
the ventilation slots .
Turn the mower upside down and clean the blade area
and the swivel castors regularly. Use a stiff brush or
scraper to remove compacted grass clippings (see
figure J).
Blades are reversible .
f Make sure all nuts, bolts and screws are tight
to ensure safe working with the garden tool.
(see figure K)
f Periodically visually inspect the machine and
replace worn or damaged parts for safety.
f Ensure that only official Honda replacement parts
are used .
f Replace all blades and bolts as a set as required .
Storage in winter
f Turn off the mower using the On/Off switch.
f The mower will operate between 5 °C and 45 °C.
During the winter season once the temperature in the
garden is consistently below 5 °C store the mower
and the docking station in a secure, dry place, out of
the reach of children.
Do not place other objects on the mower or docking
station .
It is recommended to use the original packaging when
transporting Miimo over long distances.
f Store the mower only within a temperature range
between –20 °C and 50 °C. As an example, do not
leave the mower in the car in summer .
Software Update
f The mower has a USB interface which is to be used
exclusively for software updates that is performed
by your Honda authorized dealer. Use only approved
USB.org sticks (formatted to FAT 32) and approved
USB.org OTG cables.
f Do not use the USB interface for any additional
purposes . Do not plug any external devices .
f You can also enable automatic software updates
in the Miimo Settings Menu of the Mii-monitor
Smartphone Application .
Battery Hazards
f Recharge only in the Honda approved docking station .
f Miimo will operate between 5 °C and 45 °C. If the
battery temperature is outside this range, Miimo will
display a message and will not leave the docking
station. If operating, Miimo will return to the
docking station or stay in place .
f If the battery becomes defective, liquid can escape
and come into contact with adjacent components.
Check any parts concerned and contact the
Authorized Honda Dealer .
English | 5
Publicité
