Publicité
Main Menu Sub-menu 1
Settings
Mowing
mode
Security
Date & Time
Set Language
Info
Advanced
Tools
Sub-menu 2
Explanation
Place & Mow
Select between a size of 2 m x 2 m, 3 m x 3 m and 4 m x 4 m.
Mow without docking
Mower will mow in the additional lawn area without docking
station
station in random mode until it runs out of battery.
Auto Lock
If buttons are not pressed for 3 min. they will be automatically
locked .
Recommended for safety reasons and protection against theft.
– On
PIN code is required for reactivation after Auto Lock.
– Off
The buttons are always ready for input.
Change PIN
Changing of a PIN code requires entering of existing PIN code
first.
Alarm
– On
Alarm is activated .
– Off
Alarm is deactivated .
Change the date and time.
Change the display language.
System status
Information on battery charge, system information and
operating and charging time for the mower.
Wire ID
Change the perimeter wire ID when possible interferences are
nearby .
Sensor setting/Lawn
Select between Low (uneven ground), Normal and High
condition
(slippery ground). Mower bump sensor will become more or
less sensitive depending on lawn condition selected .
Remap
Deletes the current map of the garden.
Factory Reset
Reset the mower to factory settings will delete all personal
settings (not PIN).
After a factory reset, the mower will need to remap the the
lawn areas .
Garden Overview
Displays the number of mapped gardens, their size, their wire
ID and the date of the last time the garden was cut.
Delete garden
Delete one specific garden map or select to delete all maps at once.
Name mower
Change the name shown in the display. This can be also be
changed in the Honda Mii-monitor App. Only letters of the
Latin alphabet are possible. The number of letters is limited.
This function is not available in every language.
In some languages (e.g. Czech or Polish) a name change doesn't
have effect on display due to specific grammar requests.
Level check
Information about the ground angle of the mower. If the
mower is in the docking station and the dot on the display is
not within the indicated circle, the docking station must be
mounted at a new, more level location.
Wire signal
Detects the wire signal received from the perimeter wire,
indicating its strength (for Service Agent).
The mower will not receive a wire signal while in the docking
station .
English | 11
Publicité
