Publicité
38
SMART FUNCTIONS
Industry Canada Statement
(For transmitter module contained
in this product
This device complies with Industry Canada's applicable
licence-exempt RSSs. Operation is subject to the
following two conditions:
1 This device may not cause interference; and
2 This device must accept any interference,
including interference that may cause
undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with
a minimum distance of 20 cm (7.8 inches) between the
antenna and your body.
NOTE
• THE MANUFAC TURER IS NOT RESPONSIBLE
FOR ANY RADIO OR TV INTERFERENCE CAUSED
BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
Smart Diagnosis™ Function
Should you experience any problems with the appliance,
it has the capability of transmitting data via your
telephone to the LG Customer Information Center. NFC
or Wi-Fi equipped models can also transmit data to a
smartphone using the LG Smart ThinQ application.
Smart Diagnosis™ through the
Customer Information Center
• For a ppliances with the
1 Call the LG Electronics Customer
Information Center at:
(LG U.S.A.) 1-800-243-0000
(LG Canada) 1-888-542-2623
2 When instructed to do so by the call
center, place the mouthpiece of the phone
close to the Smart Diagnosis™ icon. Do not
press any other buttons.
3 Press and hold the Temp. Control button
for 3 seconds.
MFL66101237_EN_FR_SP.indd 38
4 Keep the phone in place until the tone
5 Once the countdown is over and the tones
NOTE
• Smart Diagnosis™ cannot be activated unless the
• For best results, do not move the phone while the
• If the call center agent is not able to get an accurate
• The Smart Diagnosis™ function depends on the local
• Bad call quality may result in poor data transmission
Smart ThinQ Smart Diagnosis™
• For a ppliances with the
Use the Smart Diagnosis feature in the Smart ThinQ
application for help diagnosing issues with the appliance
without the assistance of the LG Customer Information
Center.
Follow the instructions in the Smart ThinQ application to
perform a Smart Diagnosis using your smartphone.
NOTE
• Smart Diagnosis™ cannot be activated unless
or
logo
transmission has finished.
have stopped, resume your conversation
with the call center agent, who will then
be able to assist you using the information
transmitted for analysis.
appliance can be turned on using the Power button.
If the appliance cannot be turned on, troubleshooting
must be done without using Smart Diagnosis™.
tones are being transmitted.
recording of the data, you may be asked to try again.
call quality.
from your phone to the call center, which could cause
Smart Diagnosis™ to malfunction.
or
the appliance can be turned on using the Power
button. If the appliance cannot be turned on,
troubleshooting must be done without using
Smart Diagnosis™.
logo
17. 4. 4. 오후 4:55
Publicité
