Publicité
OPERATION
BEFORE USE
Clean the Styler.
Clean the Styler thoroughly and wipe off all dust that accumulated during shipping.
See Maintenance, page 38. Do not plug in or operate the appliance until the
interior and exterior have thoroughly dried.
Unpack accessories.
Unpack the shelf and hangers. For instructions on installing or using accessories,
see Loading the Styler, pages 25-28. Accessories can be purchased separately
from the LG Customer Information Center. Call 1-800-243-0000 (USA) or
1-888-542-2623 (Canada).
Assemble the drip tray.
Insert the drip tray at the bottom of the cabinet. See
Assembling the Drip Tray, page 18.
Connect the power supply.
Check if the power supply is connected before use.
Wash dirty clothes if necessary before putting them in the Styler.
The Styler does not have a washing function. Stains and loose dirt from
one item may transfer to others during a cycle. Wash or brush off dust
and dirt, or spot-clean items, to avoid setting stains or transferring dirt or
odors.
MFL66101237_EN_FR_SP.indd 19
CAUTION
y Do not scratch the Styler with a sharp object or use a detergent that
contains alcohol, bleach, a flammable liquid or an abrasive when removing
any tape or adhesive from the Styler,.
y Do not peel off the model or serial number label or the technical information
on the rear surface of the Styler.
NOTE
Remove adhesive residue by wiping it off with your thumb or dish detergent.
OPERATION
19
17. 4. 4. 오후 4:55
Publicité
