REPLACEMENT PARTS
Part
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
CARE AND MAINTENANCE
• The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life and require no
further lubrication. However, we recommend periodic cleaning/vacuuming of the fan/heater.
• Clean the trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft cloth.
DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products
can be obtained at supermarkets or hardware stores.
• Make sure the unit is turned OFF and unplugged before cleaning the heater or fireplace.
A597
Part Name
Thermostat Sensor
Blower/Heater Assembly
Main Circuit Board
Control Panel Circuit Board
Control Panel Buttons
Flame Generator Drive Motor
Flame Circuit Board
Emberbed Circuit Board
Logset assembly
Remote Control
Part Number
7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
P115
www.tsicustomerservice.com
6
7
8
9
10