Publicité
8.
Adjust the fridge door.
·
Remove the finishing panel in the centre and on the left corner of the top of the door. Move the cables
and the hinge pin holder from right to left. Remove the replacement finish panel from the packaging
and attach it to the top right corner of the door.
·
Remove the hinge pin holder, stop block and door stop from the bottom of the door. You can find the
replacement stop block in the packaging. Install this stop block, the hinge pin holder and the door stop
on the left.
9.
Replace the top door. Ensure the door is aligned horizontally and vertically so that the seals are
closed on all sides. The packaging contains the replacement hinge cover plate and hinge for the left
side. Use this hinge to attach the door and screw it tight. Connect the electrical connector of the
cables (4 & 1). Connect the cables (2 & 3) on the right side.
Attach the hinge cover plate. Note: when installing the cover plate on the right side, you must
remove the 2 inserts.
62
DO91334C
Publicité
