Publicité
DOOR CONVERSION
If you need to hinge your door on the opposite side, it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 12 hours
before switching it on. This allows the coolant to set.
It is recommended to use a crosshead screwdriver, a flathead screw-driver and a socket wrench (5/16"
mm) (not supplied).
1.
Loosen the screws of the left and right hinge cover plates and remove the plates. Disconnect the
connector from the cables 1&2. Loosen the screws of the upper hinge and remove the hinge.
2.
Lift the upper door and place it on a padded surface to prevent it from being scratched.
3.
Unscrew the bolts of the middle hinge and remove the middle hinge. Remove the lower door and
place it on a soft surface to avoid scratching it.
4.
Move the cover caps from one side to the other in the middle of the appliance.
5.
Carefully tip the appliance backward. Remove the bottom hinge by unscrewing the screws. Remove
the hinge pin from the plate. Remount the pin in the other opening of the hinge plate. Attach the
adjusted hinge plate to the left side of the fridge.
60
DO91334C
Publicité
