3.
Move the cover plates from one side to the other.
4.
Remove the bottom hinge and adjustable foot.
! Attention: the inclination of the refrigerator must be less than 45° so that the compressor oil does not
enter the cooling circuit. If you do shut down the unit completely, wait 24 hours before turning it back on.
5.
Reattach the pin in the hinge so the pin is pointing upwards when the hinge is turned.
6.
Attach this hinge at the bottom of the appliance. Reattach the door to the unit. Swap the adjustable
feet.
52
DO91203F