Publicité
using talkback
Talkback allows you to communicate from the parent unit to the baby unit.
To use talkback press button (20) on parent unit and hold. The parent unit screen will show TALK.
1
The audio from baby unit will be muted and the parent will not be able to hear the baby until the
2
button (20) has been released.
If the volume of parent unit is set to OFF during TALKBACK, volume will be changed to default
3
volume level (medium).
paging to locate the parent unit
If both Up + (7a) and Down – (7b) keys for 3 seconds are pressed on the baby unit at the same time,
1
the paging tone is emitted.
Both parent unit and baby unit will display PAGING on the LCD.
2
If volume is OFF before paging start, reset it to default volume level (medium).
3
4
During paging, any key pressed on the parent unit or baby unit will stop the paging tone.
If the link is lost between the parent unit and the baby unit, the paging tone will not be emitted when
5
both Up + (7a) and Down – (7b) keys are pressed together. There will be no change on baby unit.
If paging is not stopped, it will expire in 2 minutes.
6
Paging function does not work if parent unit is turned off.
7
the room temperature display
The temperature surrounding the baby unit will be displayed on both the baby unit and the parent unit
between 10°C and 30°C. Both PU and BU will state LO below 10°C and HI above 30°C. To ensure accuracy
of the temperature display, do not position the baby unit in direct sunlight or near a source of heat.
selecting CELSIUS or FAHRENHEIT:
1.
The monitor is preset to measure temperature in CELSIUS.
1
2.
To change this setting press
(18) to access main menu.
2
Press +/- to select FORMAT then press
3.
3
Press +/- to select CELSIUS or FAHRENHEIT.
4.
4
5.
Press
to confirm.
5
6.
"SAVED" will display and back to previous screen.
6
7.
7
Both parent unit and baby unit will change to the temperature format selected.
8.
Temperature format in baby unit and parent unit will be synchronized automatically when parent
8
unit is linked with baby unit.
selecting a different language
The monitor is preset in English.
1
(18) on the parent unit and +/- to go to language menu.
2
To change to another language press
3
Press
and the current language is displayed.
Press +/- to select desired language and press
4
5
"SAVED" will display and back to previous screen.
14
to confirm the settings
to reset settings to default
Press
and +/- to go to Reset menu.
1
Press
and "CONFIRM?" is displayed.
2
Press
to confirm reset or press
3
menu level.
GENERAL SAFETY INFORMATION:
•
Warning! Adult use only – Keep out of reach of children at all times. Do not allow a child to play
with it – It is not a Toy
•
Make sure you store your monitor in a safe place when not in use, away from heat and water.
•
Take care not to drop either unit as this may affect the functioning of you monitor.
technical specifications
RF frequency
1921.536-1928.448MHz
channels
60
operating temperature
0-40ºC
baby unit voltage
input: 100-240Vac 50-60Hz
output: 6Vdc 450mA
parent unit battery
2x 1.2V 750mAh NiMH AAA
charger voltage
input: 100-240Vac 50-60Hz
output: 6Vdc 450mA
!
Use only with class 2 power source
IMPORTANT SAFETY INSTRUCTIONS
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and injury to persons, including the following:
1
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry
tub, in a wet basement or near a swiming pool.
2
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
they may explode. Check with local regulations for possible special disposal instructions.
Distributed by Mayborn USA Inc. PO Box 5003, Westport, CT 06881 – 5003
Copyright © Mayborn USA Inc. 2010. TOMMEE TIPPEE and CLOSER TO NATURE are registered trademarks.
Model 1082S Made in China Leaflet # 541020
to ignore the reset request and back to previous
15
Publicité
