Publicité
PROBLEM SOLVING IF YOUR SENSOR PAD TEST FAILS:
No alarm after 20 seconds
Make sure there is no movement or vibration around the
if NO movement
sensor pad and test again. If alarm triggers again, decrease
sensitivity setting and test again.
False alarm when there IS
Check the connections are secure and test again. If alarm
movement
triggers again, increase sensitivity setting and test again.
8 If the parent unit is linked with the baby unit successfully, the sensor pad icon will indicate on the
parent unit. The 5th LED (E) will light up Green if movement is detected.
9 If the sensor pad switch is on without the sensor pad connected securely, there is an error tone from
the baby unit and the sensor pad icon with image of
on the parent unit 'Connect Pad' will also flash.
10 If the sensor pad is securely installed, after 20 seconds without detecting any movement, the alarm will
be triggered on both parent unit and the baby unit and the red alarm light will come on. The LCD will
show 'CHECK BABY' until the sensor pad is reset.
11 If movement is detected again after the alarm has activated then the alarm will stop and the red alarm
light will flash in both the parent unit and the baby unit to let you know that a problem has occurred and
the baby should be checked. The LCD will show 'CHECK BABY' until the sensor pad is reset.
12 To reset the alarm, switch the sensor pad off and on again.
testing the movement sensor pad function on the parent unit:
•
To test the sensor pad function on the parent unit you will need someone else to carry out the sensor
pad functions on the baby unit.
•
If the sensor pad switch has been turned on at the baby unit the 5th LED (E)on the parent unit will light
up GREEN, and you will hear the tick sound.
•
When no movement has been detected for approx. 20 seconds the 5th LED (E) on the parent unit will
light up RED and you will hear the sensor pad alarm.
•
If movement is detected again after the alarm has activated then the red alarm light will change to
flashing mode.
•
To reset the alarm it will be necessary to go to the baby unit and turn it off then on again.
if the movement sensor alarm sounds:
•
The tommee tippee closer to nature sensor pad monitor is NOT a medical device and is NOT designed
to prevent cases of sudden infant death syndrome (SIDS). This tommee tippee closer to nature
monitor is intended to help you monitor your child and is NOT to be used as a substitute for adult
supervision.
•
The alarm going off may not be a sign of a problem with your baby. It may be a sign that the baby has
moved away from the sensor pad area, or that batteries are running low if not mains power operated.
adjusting the sound sensitivity settings of the baby unit:
•
The sound sensitivity settings of the baby unit can be changed only when parent unit is linked with
the baby unit.
TO CHANGE THE SENSITIVITY SETTINGS:
a. Press
and +/- to go to SENSITIVITY menu in parent unit.
b. Press
and the current sensitivity level is displayed.
c. Press +/- to adjust the sensitivity level from Level 1 to Level 5
10
in the parent unit will flash. A Text Prompt
KEYS
LCD DISPLAY
$#
level
level
level
level
level
d. Press
to confirm the settings.
e. "SAVED" will display and back to previous screen.
adjusting the ticking sound:
The audible ticking sound gives reassurance that your sensor pad is correctly connected and the monitor is
sensing movement. If you wish to switch off the ticking sound:
Press
and +/- to go to TICK TONE menu in parent unit.
1
and +/- to go to SENSITIVITY menu in parent unit.
Press
2
Press
and the current status is displayed.
3
Press +/- to select ON or OFF.
4
Press
to confirm the settings.
5
"SAVED" will display and back to previous screen.
6
adjusting the sensitivity of the sensor pad:
•
This monitor is compatible with standard crib mattresses. With thicker mattresses (ie spring interior) you
may need to adjust the sensitivity switch on the baby unit (14) from it's preset 'medium' position to the '
high' position. With some very thin mattresses you may need to change the sensitivity setting to 'low' .
WARNINGS
ABOUT USING THE SENSOR PAD!
•
A moving or swinging cord may be interpreted by the sensor pad as a baby's movement. To avoid this,
ensure that the cord is not positioned where it may be subject to movement.
•
You should ensure there is no vibration in or near the nursery, so that the sensor pad is monitoring
only your baby's movements.
•
The sensor pad does not carry any electricity and will not affect your baby even if the mattress is
subject to bedwetting or vomiting.
•
Never immerse the sensor pad in liquid. To clean, wipe with a dry, lint free cloth.
•
Never place the connecting cord in contact with any moving objects, or near any heated surface.
•
Always ensure wires and cables are out of reach from your baby and younger children and never place
connecting cords amongst your baby's bedding, the child could be strangled.
•
Ensure the sensor pad is used the correct way up.
•
Do not immerse sensor pad in liquid and avoid contact with moisture.
•
This product should only be used with a full size cot (crib) internal dimension 71±1.6 centimeters
(28±5/8 inches) wide and 133 ±1.6 centimeters (52 3/8±5/8 inches) long.
EXPLANATION
level 5
level 4
level 3
level 2
level 1
11
Publicité
