Downloading Further Instructions - Balluff BFF 004 A2C-S4 Série Notice D'utilisation

Inline flow sensor with display
BFF T_ _ _ _-_ _004-_ _ _A2C-S4
Validity
This manual applies to the inline flow sensor with display
BFF T_ _ _ _-_ _004-_ _ _A2C-S4.
Fig. 1: Product illustration
Intended use
The flow sensor is used together with the integrated
processing electronics to monitor the flow rate and is
intended for installation in an industrial pipe line.
The flow sensor is designed only for the purpose
described here and may only be used accordingly.
The technical specifications in this guide must be adhered to.
Improper handling or operation of the flow sensor beyond
the technical specifications will make immediate stoppage
and an inspection by an authorized Balluff service
technician necessary.
Modifications to the flow sensor or non-approved use are
not permitted and will result in the loss of warranty and
liability claims against the manufacturer.
Non-intended use
The flow sensor may not be used in areas where functional
safety (SIL) is required or where malfunctions can result in
hazards to persons and equipment.
The flow sensor may not be installed in explosion hazard
areas. Outgoing cables may not be routed in explosion
hazard areas.
The flow sensor is a standard component and not a safety
device per MRL 2006/42/EG. For safety applications a
detailed assessment of the applicability of the sensor per
EN ISO 13849 or another applicable standard by the
system designer is required.
www.balluff.com

Downloading further instructions

This guide can also be downloaded from the Internet at
www.balluff.com.
Scope of delivery
– Inline flow sensor with display
– Screwdriver
– 4 x gasket made of AFM34
– this guide
Notes to the user
The device described in the guide has been designed and
manufactured according to the state-of-the-art.
All the components were subjected to strict quality and
environmental criteria during manufacture. Our
management systems are ISO 9001 certified.
This guide provides important information about use of the
device. Safe operation requires maintaining of all indicated
safety notes and handling instructions.
The local prevailing accident prevention regulations and
general safety codes must be maintained for the range of
application of the device.
The guide is a product component and must be kept near
the device where it can always be accessed by technical
personnel.
Technical personal must have carefully read and
understood the guide before beginning any work.
Function
The flow sensor consists of a calorimetric measuring
system and processing circuitry with digital signal
processing.
The sensor evaluates the sensor signal and detects over-
or undershooting of the user-set limit values for flow rate
and medium temperature.
The switching output (NO) is active when the flow /
medium temperature has exceeded the limit (factory
default).
english 1