Publicité
6. Please give me an explanation of all the LEDs and Buttons.
LED/Button
Power LED
Network Port
Link/Act LEDs
(Ports 1-4)
WAN Link/Act LED
Wireless (2.4GHz)
LED
Wireless (5GHz)
LED
WPS LED
Power Switch
(EU Version only)
Reset Button
WPS Button
If you still encounter problems or have any questions regarding the TEW-692GR, please contact
TRENDnet's Technical Support Department.
Sequence
Color
Green
Solid
N/A
Off
Solid
Green
Blinking
Solid
Amber
Blinking
N/A
Off
Solid
Green
Blinking
Solid
Amber
Blinking
N/A
Off
Blinking
Green
N/A
Off
Blinking
Blue
N/A
Off
Solid
Green
Blinking
N/A
Off
N/A
N/A
N/A
N/A
N/A
N/A
Definition
Device is on
Device is off
LAN port connected at 10/20 Mbps or 100/200Mbps
(Half/Full Duplex)
LAN port data transmitting/receiving 10/20Mbps
or 100/200Mbps (Half/Full Duplex)
LAN port is connected at 2000Mbps (Full Duplex)
LAN port data transmitting/receiving at 2000Mbps
(Full Duplex)
LAN port is disconnected/No Ethernet Link
WAN port is connected at 10/20Mbps or 100/200Mbps
(Half/Full Duplex)
WAN port data transmitting/receiving at 10/20Mbps
or 100/200Mbps (Half/Full Duplex)
WAN port is connected at 2000Mbps (Full Duplex)
WAN port data transmitting/receiving at 2000Mbps
(Full Duplex)
WAN port is disconnected/No Ethernet Link
Wireless LAN (2.4GHz) is on or enabled/Wireless data
transmission
Wireless LAN (2.4GHz) is off or disabled
Wireless LAN (5GHz) is on or enabled/Wireless data
transmission
Wireless LAN (5GHz) is off or disabled
WPS authentication process complete
WPS authentication in process
WPS is not activated or disabled
Turns on/off power to the TEW-692GR
Hold 20 seconds to reset device to factory defaults
Hold 3 seconds to activate WPS
12
Publicité
