Publicité
NOTE: For the heater to be tilted vertically, it must be mounted in bottom keyhole
slots of mounting brackets to maintain adequate clearance and prevent possible
overheating.
3. A djust louvers to the desired position (see Figure 6).
NOTE: The louvers are designed so they cannot
be completely closed. Do not attempt to bypass this
feature; damage to the unit can result.
TO PREVENT POSSIBLE ELECTRIC SHOCK, DISCONNECT POWER TO THE HEATER AT THE
MAIN SERVICE BOX BEFORE ATTEMPTING TO ADJUST THE HEAT OUTPUT OF THIS UNIT.
CEILING
45 degrees
90 degrees
INSTALLATION
WARNING
MULTIPLE VERTICAL ANGLES
90 degrees
6
7
5 .
d
e
g
e r
s e
7
Figure 6
4
5
d
e
g
e r
s e
Publicité
