Cristec YPOWER Série Manuel Utilisateur page 26

Main precaution
Before handling the solar charge regulator, please read
carefully this manual.
Precautions regarding electric shocks
Risk of electric shock and danger of death: it's strictly
forbidden to interfere with the regulator when under
voltage.
Precautions regarding overheating of the appliance
This appliance is designed to be mounted on a vertical
wall or partition as indicated herein.
It is imperative that there be a gap of 150mm around
the regulator. The installer must ensure that the
temperature of the air at the input is lower than 65°C
in extreme operating conditions.
Measures should also be taken to allow for the
evacuation of hot air on either side of the regulator.
It's strictly forbidden to put any device on or against
the regulator.
The regulator must not be installed near a heat
source; it should be installed in a well-ventilated area.
The regulator's air inlets and outlets must not be
obstructed.
Attention hot surface: do not touch the regulator
24