Publicité
MAKE ESPRESSO COFFEE
1. Remove funnel by turning it clockwise. Set coffee filter (B) into metal funnel and
make sure the tube on the funnel aligns with groove in the appliance.
2. Add ground coffee into coffee filter (1 cup or 2 cups) with the measuring spoon. A
spoon of ground coffee powder can make about a cup of top-grade espresso coffee,
then press ground coffee powder tightly with the tamper.
3. Insert the portafilter into the appliance as explained in the section "prepare your
coffee maker".
4. Place an espresso cup on removable cup shelf.
5. After preheating is finished (power and coffee button will light), press coffee button,
the product will start brewing. When your desired capacity of coffee is obtained, press
the coffee button again to stop.
Note: To prepare 2 coffees at the same time use the 2 cups coffee filter and place 2
cups in the removable cup shelf.
6. After finish making coffee, take metal funnel out by turning it clockwise, then pour
coffee residue out with steel mesh pressed by funnel holder clip.
7. Let them cool down completely, then rinse under running water.
MAKE HOT WATER
When the preheating is finished, then press coffee button and the water pump starts
to pump water. Turn the steam control knob to "Hot water", then hot water will flow out
from the steam wand.
To stop making hot water, press the coffee button again, and turn the steam control
knob to OFF position. Hot water is used for warming cup, making tea or cooling down
the appliance.
20
Publicité
