Télécharger Imprimer la page

JVC KD-T822BT Guide De Démarrage Rapide page 15

Masquer les pouces Voir aussi pour KD-T822BT:

Publicité

Getting Started
1
Acknowledge the crossover type and cancel the
demonstration
When you turn on the power for the first time (or [FACTORY RESET] is set to
[YES]), the display shows: "2-WAY X'OVER" or "3-WAY X'OVER"  "PRESS" 
"VOLUME KNOB"  "TO CONFIRM".
1
Press the volume knob to acknowledge the current crossover type.
Then, the display shows: "CANCEL DEMO"  "PRESS"  "VOLUME KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock and date
1
Press and hold
.
2
Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Set the time in the order of "Hour"  "Minute".
5
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
6
Turn the volume knob to select [12H] or [24H], then press the knob.
To set the date
7
Turn the volume knob to select [DATE SET], then press the knob.
8
Turn the volume knob to make the settings, then press the knob.
Set the date in the order of "Day"  "Month"  "Year".
9
Press
to exit.
To return to the previous setting item, press
3
1
2
3
4
To return to the previous setting item, press
[SYSTEM]
[CLOCK]
[ENGLISH]
[РУССКИЙ]
[ESPANOL]
[FRANCAIS]
Radio
1
2
.
Set the basic settings
Press and hold
.
Turn the volume knob to select an item (see the following table), then
press the knob.
2
Repeat step
until the desired item is selected or activated.
Press
to exit.
[KEY BEEP]
(Not applicable when 3-way crossover is selected.)
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[FACTORY RESET]
[YES]: Resets the settings to default (except the stored station). ;
[NO]: Cancels.
[CLOCK DISPLAY]
[ON]: The clock time is shown on the display even when the unit is
turned off. ; [OFF]: Cancels.
Select the display language for menu and music information if
applicable.
By default, [ENGLISH] is selected.
Search for a station
Press B SRC repeatedly to select FM or AM.
Press S / T to search for a station automatically.
.
Default: [XX]
5

Publicité

loading