Publicité
Ø CLEANING YOUR APPLIANCE
• Turn off the power, unplug the appliance, and remove all items including
shelves.
• Wash the inside surfaces with a warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of
the controls, or any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse
well and wipe dry with a clean soft cloth.
• Do not use steel wool or steel brush on the stainless steel. These will
contaminate the stainless steel with steel particles and rusting may occur.
Ø POWER FAILURE
• Most power failures are corrected within a few hours and should not affect
the temperature of your appliance if you minimize the number of times the door
is opened. If the power is going to be off for a longer period of time, you need
to take the proper steps to protect your contents.
Ø MOVING YOUR APPLIANCE
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during
transportation. Also protect outside of appliance with a blanket, or similar
item.
Ø ENERGY SAVING TIPS
• The appliance should be located in the coolest area of the room, away
from heat producing appliances, and out of the direct sunlight.
CARE AND MAINTENANCE
11
Publicité
