LD 42001
FLEXIBLE LED STRIP
LD 42001
WARNING
Read this manual carefully before using the
machine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe the
enclosed safety instructions as well as the
additional safety instructions.
Only use the LED Strip indoor.
Children are not allowed to play with the
LED Strip.
Check for damaged parts before using
the LED Strip. Never use a damaged LED
Strip.
Take care of external influences.
Keep the LED Strip and its accessories
away from water, high temperatures and
inflammable materials.
Always unplug the LED Strip when it is
not in use.
Never unplug the LED Strip by pulling the
cable.
Avoid prolonged exposure when LEDS are
flashing.
Do not look directly into the LED's. It
could damage your eyes.
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the rating
plate.
INSTALLATION
Always check the proper working of the LED
Strip before starting the installation of it.
Always unplug the LED Strip before the
installation.
1. Connect the LED Strip with the RGB LED
Controller. The colored wires must
correspond.
2. Connect the RGB Controller with the 12V
adapter.
3. You can shorten the LED Strip every
10cm by cutting the cutting line.
4. Fix the LED Strip on the desired surface
using the adhesive tape on the back of
the LED Strip.
www.toolland.eu
All manuals and user guides at all-guides.com
TIP 1: Avoid objects (furniture, walls)
between the IR receiver and the remote
controller.
TIP 2: Always check if a power socket is
nearby.
USING THE LED STRIP
Plug in the LED Strip.
Point the remote control to the IR
Controller and push the button 'ON'.
Push the button with the desired color.
You can change the light intensity by
pushing the buttons:
= Higher light intensity
= Lower light intensity
Chose the desired effect with the buttons
'FLASH', 'STROBE', 'FADE' and 'SMOOTH'.
To switch off the LED Strip push the
button 'OFF'.
TECHNICAL DATA
Voltage
Power
Radiation angle
Length LED Strip
Quantity of LED's
Protection Class
Colors
ENVIRONMENT
Should your machine need replacement after
extended use, do not put it in the domestic
waste but dispose of it in an environmentally
safe way.
GUARANTEE
Refer to the enclosed guarantee conditions
for the terms and conditions of guarantee.
English
12V DC
21,6W
120°
4x30cm
30 LEDs/M
IP.66
RGB Multicolor
4