Publicité
IMPORTANT SAFETY INFORMATION
Pinch points:
Keep hands away from the crimping
tool head when crimping.
Failure to observe this warning could
result in severe injury or death.
An incomplete crimp can cause a fire.
• Use proper connector and cable combinations.
Improper combinations can result in an incomplete
crimp.
• The handle load will drop suddenly to indicate a
completed crimp. If the handle load does not drop
suddenly, the crimp is not complete.
Failure to observe these warnings could result in
severe injury or death.
Inspect tool before use. Replace any worn or
damaged parts. A damaged or improperly assembled
tool can break and strike nearby personnel.
Failure to observe this warning could result in severe
injury or death.
Greenlee / A Textron Company
HK12ID Dieless Crimping Tool
• This tool is intended for two-handed operation.
Maintain a firm grip on both handles during
operation. Using this tool in any other manner can
result in injury or property damage.
• Do not operate the tool without a connector in
place. Damage to the ram or crimping tool head
can result.
• Do not perform any service or maintenance other
than as described in this manual. Injury or damage
to the tool may result.
Failure to observe these precautions may result in
injury and property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicité
