Use three (3) 1/4-20 x 3/4 bolts, three (3) washers, and
three (3) 1/4-20 kep nuts to secure the latch top to the
latch bottom.
FRONT COVER/HOOD
Use the four (4) provided #10A x 1/2 screws to secure
the front cover hood to the unit as shown.
ASSEMBLY INSTRUCTIONS
DISTRIBUTION BLOWERS WITH GASKETS
Secure the two blowers and gaskets to the unit using the
eight (8) provided 1/4-20 x 3/4 bolts.
JUNCTION BOX BRACKET
Secure the junction box bracket to the unit using the four
(4) provided #10A x 1/2 screws.
JUNCTION BOX & FAN CENTER
Secure the junction box to the junction box bracket using
the two (2) provided #10A x 1/2 screws as shown.
6