Publicité
8
1. Connect fan wires to ceiling wires: white fan wire to white outlet wire,
black to black and green to green. Wire connectors (S6) are provided for
your convenience. If an additional blue wire is present then also connect the
blue wire to the black wire. (Optional light kit may be wired to individual
wall switches, if desired.)
2. After connections
Ground
are made, turn
splices upward
White (Neutral)
and push carefully
into outlet box.
Black (Power)
Separate blue and
black wires on one
side of the box, and
white and green wires
on the other side.
White
Black
There are 4 colored
wires coming from the
Blue
top of the motor
(including ground wire).
Wire Connnections
Outlet Box
Fan wires
Black
Black
(Hot wire for fan)
Green
Green
(Ground wire)
White
White
(Neutral wire)
Black
Blue
(Light kit wire)
All manuals and user guides at all-guides.com
Step 8
Wire
Connectors
(S6)
Ground
(Green)
Outlet Box
Ground (Green)
Downrod Ground
(Green)
Mounting Bracket
Ground (Green)
9
Step 9
Attach canopy (#3) to the
mounting bracket by placing
screws (S2) into slot in canopy.
Twist clockwise to lock
into place. Tighten screws firmly.
10
Bulb Replacement
Carefully remove small screws holding vent cover from top of motor housing
unit. Lift vented bulb access cover. Replace bulb. Replace cover and small
vent screws.
Ceiling
Canopy (3)
Screws (S2)
Bottom of Canopy
Vent Screws
Vented Access Cover
Motor Housing (7)
Publicité
