Publicité
button firmly into the hole.
5.
Remove the two bolts (7) that hold the lower hinge (4).
6.
Remove the adjustable foot (8) from the other side of the
bottom and transfer it to the corresponding position on the
opposite side of the bottom.
7.
Carefully set the door back into place making sure the pin
enters the bushing at the lower frame section (hole).
8.
Insert the top hinge (3) back and screw it to the top of the
appliance. Ensure the door is aligned horizontally and
vertically so that the seals are closed on all sides before
finally tightening the bottom hinge (4).
9.
Insert the plug buttons (5) in the uncovered holes on the
other side.
10. Put the upper hinge cap (1) back.
11.
With the door closed, check that the door is aligned horizontally and vertically and that the seals are
closed on all sides. Readjust the levelling feet as required.
ENVIRONMENTAL GUIDELINES
36
DO91901
This symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it must be brought to
the applicable collection point for recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product,
please contact your local city office, your household waste disposal service or
the shop where you purchased the product.
The packaging is recyclable. Please treat the packaging ecologically.
Publicité
