Publicité
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this trouble shooting guide for
a possible solution.
Does not work
·
Check connection of power cord to power source.
·
Plug in unit.
·
Use proper voltage.
Cools too frequently
·
The temperature setting is too cool.
·
Close door securely.
·
Be sure that food is cool before inserting.
·
Do not keep door open for too long and minimize door openings.
·
Use proper voltage.
·
Do not place unit close to heat sources or direct sunlight.
Internal temperature not cold enough
·
Check connection of power cord to power source.
·
Plug in unit.
·
Check setting and adjust as needed.
·
Close door securely.
·
Be sure that food is cool before inserting.
·
Do not keep door open for too long and minimize door openings.
·
Allow room for air to circulate around unit.
·
Use proper voltage.
·
Do not place unit close to heat sources or direct sunlight.
Unusual sounds.
·
The appliance is not level. Readjust the adjusting feet and level the unit.
·
The unit it touching a wall or another object. Gently move the appliance.
DOOR CONVERSION
If you need to hinge your door on the opposite side it is recommended that you call your local authorised
service agent to make this conversion or ask a technician. Before you reverse the door, you should ensure
the appliance is unplugged and empty. After reversing the door, leave the appliance alone for 8 hours
before switching it on. This allows the coolant to set.
It is recommended to use a crosshead screwdriver, a socket driver and a flathead screwdriver (not
supplied).
1.
Remove the upper hinge cap (1).
2.
Using a sharp object, pry out the plug buttons (5).
3.
Remove the two screws (2) and then remove the top hinge (3) that holds the door in place. Lift the
door and place it on a padded surface to prevent it from being scratched.
4.
Remove the plug (9) and transfer it to the uncovered hole at the other side. Be sure to press the
www.domo-elektro.be
35
DO91901
Publicité
