Operation; Start-Up; Switching Off; Zeroing - KERN SFB Série Mode D'emploi

7 Operation

7.1 Start-up

 Press , and the instrument will carry out a self-test. The instrument is ready
for weighing when a weight display appears.

7.2 Switching Off

 Press until the display disappears.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
The instrument comprises an automatic zero setting function, however, the
instrument can be reset to zero whenever needed as described below.
 Remove load from weighing system
 Press , and the zero display as well as the

7.4 Simple weighing

 Place goods to be weighed on balance.
 Wait for stability display
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. The instrument may be
damaged by overloading.
Exceeding of maximum load is indicated by "----" as well as a signal sound.
Remove load from weighing system or reduce preload.
SFB-BA-e-1630
.
STABLE
indicator will appear.
ZERO
29