Animal Weighing - KERN SFB Série Mode D'emploi

7.11 Animal weighing

The animal weighing function is ideal for unstable loads.
The weighing system calculates and displays a stable mean average from several
weighing values.
The animal weighing program may either be enabled by calling up menu block
"P3 OTH" or "P4 OTH" „ANM"  „ON" (See chap. 8) or by using the faster option of
a key combination.
The indicator shows
HOLD
 Place the load onto the weighing system and wait until it is fairly stable.
 Press and
weighing function is enabled.
During the calculation of a mean average you can add or remove loads as the
mean average will be continuously updated.
 To disable the animal weighing function press
40
as long as the animal weighing function remains enabled.
at the same time, a signal sounds, meaning that the animal
and at the same time.
SFB-BA-e-1630