Télécharger Imprimer la page

Amica VM 1043 Yugo Notice D'utilisation page 7

Publicité

Do not use the vacuum cleaner without a dust bag and/or fi lters.
If the opening, which sucks air, hose or telescopic tube are clogged,
you should immediately turn off the vacuum cleaner Before restart­
ing the vacuum cleaner, fi rst remove the blocking item.
Do not use the vacuum cleaner too close to heaters, radiators, cig­
arett e butt s, etc.
Before using the vacuum cleaner, remove sharp objects from the
fl oor to avoid damaging the dust bag.
Do not collect fi ne parti cles such as: fl our, gypsum, printer toners,
etc., as this may clog fi lters and damage the vacuum cleaner.
Make sure that extension tube is fully withdrawn before you put
away your vacuum cleaner either in verti cal or horizontal positi on.
SPECIFICATION:
Power specifi cati on:
Nominal power:
Maximum power:
Net weight:
YOUR APPLIANCE:
1. Telescopic tube
2. 2­in­1 all­purpose sucti on brush
3. 2­in­1 crevice and book att achment
4. Paper dust bag
5. Hose
6. Upholstery nozzle
7. Adjust power*
8. On / off butt on
9. Power cord retract butt on
4
8
1
Note! Figures are for illustrati ve purposes only Individual models
may vary.
* Available on selected models
AC 220­240V / 50Hz
850W
900W
5 kg
7
2
9
3
5
6
Assemble the appliance
Always unplug the appliance before att aching or removing att ach-
ments!
Insert the end of the hose into the intake port, taking note of
the guides in the intake port and the tabs at the end of the
hose. Then gently twist the hose to lock it in the intake port.
Detach the hose: Gently twist the hose to unlock it and re­
move it from the intake port.
Connect the telescopic tube with the hose and the brush.
Extend the telescopic tube to the desired length.
Before you start vacuuming, extend power cord cable to suffi ­
cient length and insert the plug into the wall socket. The yel­
low mark on the power cord indicates it is extended almost
all the way. When you see the red mark do not pull the power
cord any further.
Use the on/off butt on to turn on the appliance. When you
have fi nished using the appliance, press the on/off butt on to
turn off the vacuum cleaner.
Unplug the cord from the wall outlet.
Wind up the connecti ng cord by pressing the power cord re­
tract butt on. To do this hold the cord to prevent it from tan­
gling or bumping the plug on the vacuum cleaner housing.
Disconnect the sucti on att achment — cleaning head from the
tube and disconnect the telescopic tube from the hose.
Close the telescopic tube.
The vacuum cleaner may be stored in a verti cal or horizontal po­
siti on. The hose can remain att ached to the vacuum cleaner, but
please be careful not to bend it too much during storage.
7
EN

Publicité

loading

Ce manuel est également adapté pour:

Vm 1045 yugoVm 1046 yugo