Publicité
PARTS
1.
Measuring cup
2.
Lid of the jar
3.
Lid sealing ring
4.
Jar
5.
Blade assembly
6.
Blade sealing ring
7.
Jug base
8.
Motor unit
9.
Speed knob
10. Chopper
11.
Lid of the chopper
BEFORE THE FIRST USE
·
Take the appliance out of the packaging
·
Disassemble the different parts of the appliance and clean all removable parts according to the
instructions described in the section 'Cleaning and maintenance'.
·
Reassemble all parts when they are dry:
1.
Position the seal on the blade assembly. Hold the jar upside down. Place the blade assembly with
sealing ring on the jar. Secure the base of the jug by screwing it tight in a clockwise direction.
Turn over the jar so that the base is at the bottom again.
2.
Push the lid on the jar and push the measuring cup into the filling opening of the lid.
3.
Turn the jar on the motor unit clockwise until it engages. Pay attention to the indicator on the
base of the jar.
4.
The blender is now ready for use.
USE
Caution:
·
For each use, the consecutive operation time should not exceed 3 minutes. Between two continuous
cycles at least 10 minutes resting time should be maintained. The appliance needs to cool down to
room temperature before starting the next blending cycle.
·
Never use boiling liquids or do not use the blender when the jar is empty.
JAR
1.
Make sure that the speed regulation button is at "0".
2.
Put the plug in the outlet. Turn the jar on the motor unit clockwise until it engages.
3.
Fill the container with the desired ingredients. Make sure that you do not exceed the maximum
amount of 1.5 l.
4.
Position the lid with measuring cup on the container. Turn the speed regulator to the desired speed.
20
DO1040BL
1
2
3
4
5
6
7
8
9
11
10
Publicité
