Publicité
Les langues disponibles
Les langues disponibles
A3000 open Temperature Sensor
ZAQUA018 ................................hot-water side (red)
ZAQUA019 ................................cold-water side (blue)
Please refer to the graphics in the German Installation and Operating Instructions.
1.
Warranty
Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Only use original replacement parts!
2.
Application
Temperature sensor for application with A3000 open fittings for recording tempera-
tures with a PT1000 sensing element. Design for water flow volume regulator.
• Hot-water side (red), to monitor thermal disinfection at the discharge fitting.
• Cold-water side (blue), for temperature monitoring at the discharge fitting and
providing a means for automatic, temperature-controlled hygiene flushing.
3.
Dimensions
4.
Assembly Instructions
☞
To obtain an improved heat flow, it is recommended to place a few drops of heat
transfer compound (to be provided by the customer) into the water volume regulator
(b).
4.1
Place the temperature sensor (a) into the water volume regulator (b).
4.2
Place the soft-binder (c) around the water volume regulator and hook it in.
4.3
Connect the temperature sensor (a) to the electronic module (d).
0English
- 3 -
EN
Publicité
