LIVARNO LUX HG04857A Instructions De Montage, D'utilisation Et Consignes De Sécurité page 11

Note: The motion detector
heat radiation. When outdoor temperatures
are low, it is more sensitive to body heat
than when outdoor temperatures are warm.
Be sure to regulate the sensitivity of the
sensor over the course of the year.
Setting the daylight level
Turn the rotary control LUX
of the motion detector
increase the daylight level. In position , the
motion detector only responds at pitch-
9
black night (approx. 5 lx). In position ,
the motion detector
9
daylight levels, as long as about 20,000 lx
are not exceeded (see Fig. C).
Orientating the
motion detector
Loosen the fastening screws
motion detector .
9
Turn the rotary control LUX
. Orient the motion detector
central region of the desired coverage area.
Move about through the coverage area un-
til you are satisfied with the response char-
acteristics of the motion detector
the proper orientation, change the position
of the rotary control SENS
tation of the motion detector
Re-tighten the fastening screws
adjustment.
Turn the rotary control LUX
position. These can be determined during
the dawn or twilight hours during which the
spotlight should respond. Slowly turn
10
responds to
9
on the bottom
17
clockwise to
9
also responds at
of the
7
to position
17
into the
9
. To find
9
or the orien-
18
.
9
to fix the
7
to the desired
17
the rotary control LUX
reacts to movement within the coverage area.
Cleaning and storage
Press the ON / OFF switch
position if you will not be using the product
and want to store it.
Check the motion detector
cell for dirt regularly. If dirt or is present,
12
remove it to guarantee flawless function of
the product.
During the winter, keep the product and
especially the solar cell
and ice.
Clean the product with a lint-free, slightly
moist cloth and mild cleaning agent.
Troubleshooting
= Fault
= Cause
= Solution
= The product does not switch on.
= The ON / OFF switch
OFF position.
= Press the ON / OFF switch
position and red LED indicator of ON / OFF
switch lights on at the same time.
11
= The rotary rotary control LUX
too dark.
= Adjust the rotary control LUX
brighter.
= The motion detector
rectly oriented.
= Clean the motion detector
clockwise until it
17
into the OFF
11
and the solar
9
free from snow
12
is in the
11
into the ON
11
is adjusted
17
so it is
17
is dirty or is incor-
9
or reorient it.
9
GB/IE/NI 11