Publicité
STEP 15
8
(x25)
8
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE
INSTALLED PROPERLY.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Be sure perforated holes on finished surface of back panel are
positioned as shown.
Now tighten screws from step 6. Also tighten Kick (J) and support (K)
cam locks (1) if they were not tightened in step 13.
Raw Surface
L
22
Publicité
