ohmex FRY 3003 Manuel D'utilisation page 69

FRY 3003
APPLIANCE DESCRIPTION (Fig. F1)
1) Appliance body
2) Appliance handles slots
3) Lid
4) Lid handle
5) Inspection window
6) Resistor unit
7) Filter
8) Feet
9) Oil container
10) Bucket
11) Bucket handle
> > At first use
At the appliance first use accurately clean the oil container (9) with a damp
sponge soaked in hot water.
Wash the bucket (10) with hot water and a normal dishes detergent.
Abundantly rinse and accurately dry all of the components.
> > Appliance preparation
Make sure that the fryer isn't connected to the power
socket.
• Place the appliance on an horizontal and stable surface and
make sure that all the feet (8) are supported by the surface itself.
Remove the lid (3) by holding it from the handle (4) (Fig. F2).
•
Remove the bucket (10) (Fig. F2).
•
• Place the resistor unit (6) (see page 70).
• Pour oil in the container (9) until it reaches the "MAX" level indicated on the contain-
er itself.
Oil container capacity: 3,0 litres.
Use frying oil or grease ONLY.
Controls
12) Voltage presence indicator light
(red) - "POWER"
13) Oil temperature achieved indicator
light (green) - "READY"
14) Start/oil temperature selector
15) ON/OFF switch - Timer
16) Safety switch
17) "RESTART" button
USE
EN
63