ohmex FRY 3003 Manuel D'utilisation page 64

EN
• Do not obstruct ventilation or heat elimination openings.
• If the power cord of this appliance is damaged, it must be changed exclusively
by a technical assistance centre authorized by the manufacturer, since special
tools are necessary.
The electrical safety of this appliance is guaranteed only when it is
correctly connected to an effective grounding system as specified
by the current norms on electrical safety.
• It's necessary to check this fundamental safety condition and, in case of doubts,
ask for an accurate check of the system by professionally qualified personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system.
• Before carrying out any operation turn off the appliance and disconnect
the power plug from the outlet and wait for the appliance to cool down
completely.
• Don't connect the appliance to the power supply through external timers or
remote control systems.
☞
Keep the power cord away from the appliance hot parts.
☞
Make sure that the power cord is not in the way when moving
around the appliance in order to prevent that someone could, even
inadvertently, pull it toppling the appliance.
Burns danger!
☞
Place the appliance on an horizontal and very stable bearing plane,
whose surface is not delicate (ex. lacquered furniture, tablecloths
etc.). Make sure that the appliance is safely supported.
58
GENERAL WARNINGS
FRY 3003