Publicité
8
Fig.
a) Insert the motor protection filter and foam filter into
the dust container.
b) Fit the dust container onto the motor unit and lock it
into place.
New filters can be obtained from our after-sales ser-
vice, if required.
Accessory kit
9
Fig.
Accessories are inserted into the air intake opening of
the cordless vacuum cleaner using adapters as shown.
a) Long crevice nozzle
For difficult-to-reach places
b) Nozzle with brush rim
For fittings and stubborn dirt
c) Interchangeable upholstery fitting (for nozzle with
brush rim)
For seats and cushions
If you want to use the nozzle with brush rim as an
upholstery nozzle, first pull the brush rim sideways
off the nozzle. Then, pushing in the opposite direc-
tion, fit the interchangeable upholstery fitting onto
the nozzle.
Make sure that it is seated correctly.
d) Mattress nozzle
For mattresses and cushions
e) Extension hose
For difficult-to-reach and high up places.
All the nozzles listed above (fig. 9 a-d) can be fitted to
the hose.
Care
Make sure that the cordless vacuum cleaner is swit-
ched off and disconnected from the charger before
cleaning it.
It can be cleaned using a standard commercially availa-
ble plastic cleaner.
!
Do not use abrasive cleaning product, glass cleaner
or multi-purpose cleaning product. Never immerse
the vacuum cleaner in water.
Subject to technical modifications.
50
Publicité
