Publicité
4.
Attach Fold-down Door
P1
F1
F2
P1. Left Side Panel
P2. Bottom Panel
P3. Right Side Panel
P4. Shelf
P8. Fold-down Door
F1. 5/16" Allen-head bolt
F2. 5/16" Flange Nut
A. Hinge Bracket
Insert the fold-down door (P8) hinge brackets into the bottom
of the workstation frame, as shown. While one person holds
the fold-down door (P8) in place, align the holes in the bottom
corners of the fold-down door (P8) with the corner holes in the
workstation sides (P1 and P3). Fasten with two Allen-head bolts
(F1) at each corner. Insert another 5/16" Allen Head Bolt (F1)
through the underside of the bottom panel (P2) and into the
elongated hole at back of each hinge bracket. Fasten each bolt
with a 5/16" flange nut (F2), as shown.
6.
Attach Door Catch Pins
F3
F4
F4
F3
P1. Left Side Panel
P4. Shelf
F3. Star Nut
F4. Door Catch Pin
Insert the door catch pins (F3) into the holes in the cable brackets,
and fasten them with the star nuts (F4), as shown. Close the door.
Using the Allen wrench (provided), completely tighten all the bolts.
8
P4
P2
P3
P8
F1
A
F1
P1
P4
5.
Attach Door Cables
A
B
P1. Left Side Panel
F2
P2. Bottom Panel
P4. Shelf
P8. Fold-down Door
A. Cable Bracket
B. Door Cable
Position the fold-down door (P8) cable into the slot in the bottom
of each cable bracket (one on each side), as shown.
Pull down on the cable until it is firmly seated in the slot.
P1
P4
P4
P1
P2
P8
Publicité
