Publicité
Combination with a swing door drive unit
For barrier-free doors
Due to the integrated motorised unlocking function, the lock is suitable for combination with swing door
drive units, for example for barrier-free doors that are automatically unlocked and opened.
Access control system
Due to the status feedback integrated into the lock and the motorised unlocking function, the lock can be
Electrical unlocking
connected to an access control system . Unlocking is then executed by an electrical impulse that can, for
example, be transmitted from inside or outside by a magnetic card reader, finger scanner or a door code
system.
Daily operation
Bolt is retracted up to
When Daily operation is activated, the flip latches are blocked and the bolt is retracted to 5 mm. The door
5 mm
is not considered to be locked, rather just held closed. In this switching position, the lock can be unlocked
much faster by the motor or, in the case of the sFlipLock e-access, by the coupled external lever handle.
Office function
Lock continuously
The Office function enables the lock to be permanently unlocked by actuation by a permanent contact. This
unlocked
means that buildings can be made accessible from outside during fixed times using an access control
system or timer.
Blocking function
Blocking function is
If the Blocking function is activated, the lock will lock immediately and all electrical opening functions are
retained
blocked. The lock can still be opened in the escape direction using the panic function when the lock
function is activated.
EN
50
Functions and operation
Publicité
