Publicité
EN
8 SERVICE AND REPAIRS
8.1
ADJUSTING CABLE
The auger drive lever's cable is adjusted at the factory. Any
adjustments are carried out as follows:
1. Loosen the screw (14:D) and move the spring (14:E)
backwards to tension the cable.
2. Tighten the screw (14:D) in the desired position.
9 STORAGE
Never store the snow thrower with petrol in the
tank in a confined area with poor ventilation.
Highly inflammable petrol fumes are formed.
If the snow thrower is to be stored for a period longer than 30
days, the following measures must be taken:
1. Empty the petrol tank.
2. Start the engine and let it run until it stops due to lack of
fuel.
Empty the petrol tank outdoors when the engine is
cold. Do not smoke. Empty into a container
designed for petrol.
4. Change the engine oil if this has not been done for 3
months.
5. Unscrew the spark plug and pour 30 ml of engine oil into
the hole. Crank the engine a couple of times. Screw back
the spark plug.
6. Clean the whole snow thrower thoroughly.
7. Lubricate. See "Lubrication".
8. Inspect the snow thrower for damage. Repair if
necessary.
9. Touch up any paint damage.
10. Rust-proof unpainted metal surfaces.
11. Store the snow thrower indoors if possible.
32
All manuals and user guides at all-guides.com
ENGLISH
A full warranty is issued against manufacturing and material
defects. The user must carefully follow the instructions given
in the enclosed documentation.
For batteries: six months from the purchase date.
The warranty does not cover damage due to:
-
-
-
-
-
Neither does the warranty cover:
-
-
-
The purchaser is covered by the national laws of each
country. The rights to which the purchaser is entitled with the
support of these laws are not restricted by this warranty.
10 PURCHASE TERMS
Neglect by users to acquaint themselves with
accompanying documentation
Carelessness
Incorrect and non-permitted use or assembly
The use of non-genuine spare parts
The use of accessories not supplied or approved by Stiga
Wear parts such as drive belts, augers, headlights, wheels,
shear bolts and wires
Normal wear
Engines. These are covered by the engine manufacturer's
warranties, with separate terms and conditions.
Publicité
