Tunturi T80 Mode D'emploi page 14

MOTOR SPEED ERROR. Ensure correct usage of
the treadmill. Do not push the belt with your feet.
Turn the power switch off, wait 1 minute and turn the
power switch on again. If treadmill recovers to normal
operation, you may continue to use the treadmill.
Otherwise, call the dealer for service.
MOTOR OVERLOAD. Ensure correct usage of the
treadmill. Do not brake the belt. Turn the power switch
off, wait 1 minute and turn the power switch on again.
If treadmill recovers to normal operation, you may
continue to use the treadmill. Ensure the lubrication
is sufficient, re-lubricate the running deck if needed.
Otherwise, call the dealer for service.
LIFT MOTOR ERROR. Call the dealer for service.
LIFT MOTOR OVERLOAD - Ensure correct usage
of the treadmill. Do not overload the lift motor by
continuously changing the elevation. Turn the power
switch off, wait 1 minute and turn the power switch on
again. The lift motor will be automatically calibrated
when the power switch is turned on. If treadmill
recovers to normal operation, you may continue to use
the treadmill. Otherwise, call the dealer for service.
MOVING AND STORAGE
You can fold up the T80/T85(Foldaway) treadmills to
space saving storage position.
Ensure the transportation wheels are sideways. Turn
off the power switch and unplug the power cord from
the wall and the treadmill. Take hold of the aluminium
profile at the rear end of the running base and lift the
running base up. Press the horizontal bar in the folding
frame with your foot to lock the running base to the
lower frame. NOTE! The gas spring is designed to make
lifting the running base easier. Always remember to
ensure that the running base is locked in the storage
position.
Move the T80 / T85 (Foldaway) treadmill according
to the following instructions: turn the transportation
wheels located at the front end of the treadmill so that
they point forward, and push the equipment on the
transportation wheels. If you wheel the equipment
sideways, there is no need to turn the transportation
wheels. Once you have moved the treadmill, return
the transportation wheels to their sideways position.
To release the running base lock, tilt the running base
slightly forward while pushing the locking levers in
the lower frame to the side with your foot. Lower the
treadmill carefully onto the floor.
Move the T80 / T85 treadmill according to the
following instructions: turn off the power switch
and unplug the power cord from the wall and the
treadmill. Stand behind the treadmill and take hold of
the aluminium profile at the rear end of the treadmill.
Tilt the rear end of the equipment so that it rests on
the transportation wheels, and move the equipment by
wheeling. Lower the treadmill carefully onto the floor.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
14
All manuals and user guides at all-guides.com
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment. The running belt needs to
be realigned and centered after moving.
To prevent malfunctioning of the treadmill, store it in a
dry place with as little temperature variation as possible,
protected against dust. Always unplug the treadmill
from the electrical outlet when not in use.
TECHNICAL DATA
T80 (Foldaway)
Length .........................................210 cm/ 83"
(storage position ..........................76 cm / 30")
Height .........................................142 cm / 56"
(storage position ..........................197 cm / 78")
Width .........................................91 cm / 36"
Weight T80 / T80 (Foldaway) ......114 kg/251 lbs /
....................................................150 kg/330 lbs
Running surface ..........................51 x 143 cm /
....................................................20"x56"
Speed ..........................................0,5-20,0 km/h /
.................................................... 0,3-12,5 mph
Elevation range ............................0-10 %
Motor ..........................................3,0 hp
T85 (Foldaway)
Length .........................................210 cm / 83"
(storage position ..........................76 cm / 30")
Height .........................................142 cm / 56"
(storage position ..........................197 cm / 78")
Width .........................................91 cm
Weight T85 / T85 (Foldaway) ......114 kg/251 lbs /
....................................................150 kg/330 lbs
Running surface ..........................51 x 143 cm /
....................................................20"x56"
Speed ..........................................0,5-22,0 km/h /
....................................................0,3-14 mph
Elevation range ............................0-10 %
Motor ..........................................3,5 hp
T80 / T85 treadmill meets the requirements of the EU's
EMC Directives on electromagnetic compatibility (89/
336/EEC) and electrical equipment designed for use
within certain voltage limits (73/23/EEC). This product
therefore carries the CE label. T80 / T85 treadmill
meets EN precision and safety standards (Class SA, EN-
957, parts 1 and 6).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications
without notice.
CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage due to
negligence of the assembly, adjustment and maintenance
instructions described herein. Changes or modifications
not expressly approved by Tunturi Oy Ltd will void the
user's authority to operate the equipment!
We wish you many enjoyable trainings with your
new Tunturi training partner!