Publicité
FR
ES
Bouton de configuration
①
①
Bouton de musique
②
②
Réglage du volume
③
③
Product Specification
1. Receiver
Receiver working voltage:
Power consumption:
Operating Range:
Operating temperature:
RF penetration range:
2. Transmitter
Battery:
Working Current:
Operating temperature:
Waterproof Level:
Transmitter installation
1. Remove the battery isolation strip on the back of the transmitter before use.
2. Use the enclosed double-sided tape to stick the transmitter to the wall or door.
All manuals and user guides at all-guidesbox.com
IT
Botón de configuración
Pulsante Setup
①
Botón de música
Pulsante Musica
②
Ajuste de volumen
Regolazione Volume
③
AC100-240V 50/60Hz
1W
400M+/1300ft+ （in the open air）
-10℃~50℃ (14℉-122℉)
4 walls can be penetrated
DC 3V (CR2032 x1)
30mA
-10℃~50℃
IP65
EN
Instructions
1. Press button "
" to choose from working modes: Flashing only, Ringing only,
Flashing & Ringing
2. "
" To select, press the music button once for each chime to select your music,
total 38 chimes.
3. "
" Press the button once each time to adjust the 4 volume levels. (Low - High)
4. Pairing Method
a. Choose your favourite melody.
b. Long press the music button "
'dingdong' tone is heard.
c. Press the transmitter button once, the receiver will play the chosen melody.
5. Press and hold the Volume Adjustment "
'dingdong, dingdong' tone is heard. (This will clear the pairing)
6. There is a 'dingdong' tone when the receiver is plugged in for the first time. This
indicates the power is on.
7. Indicator light： the light will flash while the chime is playing on the receiver. The
transmitter indicator light will be lit up when pressing the bellpush.
" (at least 3 seconds) on the receiver until a
" for at least 5 seconds until a
EN
Publicité
