Ariston FWS Installation Et Mode D'emploi page 22

GB
overview
This manual constitutes an integral and
essential part of the product. Read the in-
structions and warnings carefully as they
provide important information on installa-
tion, operation and maintenance safety.
The technical notes and instructions in this
document are provided to help installers
perform the installation process correctly,
in accordance with the best working stand-
ards.
This module is designed for instant produc-
tion of domestic hot water. It is strictly for-
bidden to use the device for purposes other
than those specifi ed. The manufacturer
shall not be held liable for any damage due
to improper, incorrect or unreasonable use
or due to failure to comply with the indica-
tions outlined in this manual.
The installer must be qualifi ed to install
heating devices for plumbing and sanitary
water systems in accordance with Ital-
ian Decree Law 37/08, and must issue the
customer a declaration of conformity upon
completing installation.
Design, installation, maintenance and any
other interventions must be carried out in
full conformity to applicable regulations and
any instructions provided by the manufac-
turer.
Incorrect installation can harm persons or
animals and damage objects; the manufac-
turer shall not be held liable in such cases.
The solar circulation unit is delivered in
cardboard box. After removing all the pack-
aging, make sure that the device is intact
and that no parts are missing. Should this
not be the case, contact the supplier.
Keep all packaging material (clips, plas-
tic bags, expanded polystyrene, etc.) out of
reach of children, as it may be potentially
dangerous.
Before any work is carried out on the mod-
ule, make sure that the power supply is cut
off by turning the external switch to the
"OFF" position.
22
Any repairs must be carried out by qualifi ed
technicians using original spare parts only.
Failure to comply with the above-mentioned
recommendations may jeopardise the de-
vice's safety and void the manufacturer's
liability. When cleaning the external parts
of the device, switch the module off by turn-
ing the external switch to the "OFF" position.
Use a damp cloth soaked in soapy water to
clean the device. Do not use aggressive de-
tergents, insecticides or toxic products.
CE mark
The CE mark guarantees that the device
conforms to the following directives:
- 2004/108/EC
concerning electromagnetic
compatibility
- 2006/95/EC
concerning electrical safety