Installation Procedure - Toto LPT960.8 Manuel D'installation

1) Place the lavatory and pedestal into
the installed position. Make sure the
product is level when placed against
the wall. Carefully mark the mount-
ing hole locations for the lavatory
and pedestal (see Illustration 1).
NO TE: To help recall the lavatory
and pedestal positions, trace
a line along the sides and top
edge of the lavatory and along
the base of the pedestal (see
Illustration 1).
Carefully remove the lavatory and
then the pedestal.
2) Drill the pilot holes for the lavatory
and pedestal screw locations (see
Illustration 2).
Install the pedestal mounting hard-
ware. Place a metal washer onto the
bolt and insert the bolt through the
mounting bracket and the pedestal
brace. Install the other metal washer
onto the bolt and then the nut.
Tighten this connection securely.
Return the pedestal to the position
marked on the floor. Install the ped-
estal bracket to the floor using the
three supplied screws (see Illustra-
tion 3).
DO NOT OVERTIGHTEN.
Overtightening may damage
WARNING
the products and cause per-
sonal injury and/or property
damage.

INSTALLATION PROCEDURE

4
Ill. 1
Top & Side Edge
Mounting Holes
Mounting Holes
Base of Pedestal
Ill. 2
Pilot
Holes
Pedestal Mounting
Hardware
Ill. 3
Pedestal
Bracket
of Lavatory