Laser Receiver "Gyro Tracer - Futech RED RACER Mode D'emploi

Tilt / windfunctie
• Activate or disactivate the tilt/wind function with button "6"
•
As soon as the levelling of the device is interupted (by fierce winds or external
manipulation), the device will stop turning. The LED (above button "6")will blink.
•
When this happens, it is possible that the settings are changed, so you have to
reset the device. To keep being sure of the correct working height.

Laser Receiver "Gyro Tracer"

•
Use the laser receiver in high light intense environment, as external work and
working at large ranges.
BEWARE: The laser receiver is deliveres standard with this laser. Please use only
this type of receiver.
•
Remove the plastic films of the device.
•
Open the battery cover, and place the batteries inside, according polarisation.
•
Press on/off button (7) and the LCD screen wil start.
• Move the receiver up and down in horizontal position, to find the horizontal laser
beam. Move the receiver from left to right in vertical position, to find the vertical
laser beams.
•
When the reception field detects a laser beam, the markers wil enlighten in the
shape of arrows. Move the receiver intyo the arrow direction to find the laser-
beam.
•
When you find the laser beam, there will be a flat line on the LCD screen. You also
hear a solid sound. This means that the laserbeam is perfectly in the middle of the
reception field.
•
BEWARE: avoid reflecting surfaces, such as windows, mirrors... . They can generate
a "ghost"beam and will give you the wrong information.
•
The clamp helps you to put the receiver onto a measuring rod.
EN
Red Racer 41